By checking the level of the camera, more stable shooting can be achieved. The HDC outer cover is made of carbon graphite. Much lighter and stronger than plastic, it can easily withstand intense movement under the toughest shooting conditions. When used in combination with the HDLAseries Large Lens Adaptor, it permits the viewfinder to be mounted at a low position, making the viewfinder position closer to the optical axis of the lens.
A slight protrusion of the upper front part of the handle enables stable holding of the camera while you are shooting, by holding the front part of the handle. Furthermore, the movable range of a front-rear slide mechanism for the viewfinder attachment is wide to provide the best balance for shooting with the camera on your shoulder.
The swing handle mechanism allows for mounting and usage on the HDLA series, making forward shifting with a largescale viewfinder possible.
This enables the same total longitudinal size as a standard studio-use camera, for operability equivalent to that of a standard studio-use camera.
The position of the shoulder pad can be adjusted for stable shooting according to the build of the camera operator, the type of lens in use, or the shooting style. A low-repulsion foam shoulder pad fixed type is available as an option Part No. The assignable switches on the side panel can be assigned to your desired function, such as electronic color-temperature conversion.
These switches can be synchronized with the assignable switches on viewfinder models, such as the HDVF-EL75, and can be used to operate the viewfinder functions, such as magnification. Also, two function-assignable switches are on the upper part of the handle, and can be used to set the viewfinder functions such as lens zoom.
This function stops the high-voltage power supply from the camera control unit if the unit is not connected securely. You can add new functions and compatibility with other video formats by embedding the following optional accessories.
For details about installing optional accessories, please contact a Sony sales representative or Sony service representative. For specifications or more detailed information on optional accessories, refer to the manual of each accessory.
Production of some of the peripherals and related devices shown in the figures may have been discontinued. For advice on choosing devices, please contact your Sony dealer or a Sony sales representative. LAN cable. Optical fiber cable. Attach one end of a shoulder strap not supplied to this fitting post, and the other end to the fitting post on the other side of the camera.
Locks the left-right position of the viewfinder. Loosen this ring to adjust the viewfinder position. Always keep the lens mount covered with this cap when a lens is not attached. The cover can be removed by moving the lens fixing lever upwards. Connect the lens cable. The camera can control the lens functions through this cable. You can also assign other functions to this button, using the menu displayed on the viewfinder screen. The return video 1 signal from the camera control unit is monitored on the viewfinder screen while this button is pressed.
Pressing the right button selects the available CC filters cross filter 1 , K, K, K in sequence. While holding this button depressed, press either of the filter select buttons to select the built-in optical filters.
To automatically adjust white and black balance when the camera is used in standalone status without connecting to the camera control unit. WHT: Automatically adjust white balance. BLK: Automatically adjust black balance. To select the master gain of the video amplifier based on lighting conditions when the camera is used in standalone status without connecting a camera control unit.
The relationship between the switch setting and the output signal and auto knee function is shown in the table below. To select the white balance adjustment method or the memory used to store the adjusted value when the camera is used in standalone status without connecting a camera control unit. PRST preset memory : White balance is adjusted to a preset value corresponding to a color temperature of K.
OFF: Status messages will not appear on the viewfinder screen. MENU: Menus for camera settings will be displayed on the viewfinder screen. CANCEL: When a menu is displayed on the viewfinder screen, you can cancel any changed settings or return the display to the previous menu.
To select settings from menus displayed on the viewfinder screen by turning the knob and to confirm settings by pressing the button. When a camera control unit or a remote control device, such as an MSU or RCP, is connected, the functions of 6 to 9 are controlled from the external control device and the controls on the camera are disabled. For setting the electronic shutter functions when the camera is used in standalone status without connecting a camera control unit.
OFF: The electronic shutter does not function. ON: The electronic shutter is activated. SEL: The shutter speed and shutter mode change each time the switch is set to this position. The intercom level adjustment is enabled when the.
CCU: Power is supplied from the camera control unit. ON: The tally lamp lights when a tally signal is input to the connected camera control unit or a call signal is generated in response to pressing the CALL button.
Available only when connecting a camera control unit with a prompter 2 input connector. The intercom audio listening level is adjusted with the. Press the button to display the return video signal selected with the switch on the viewfinder screen. If you use an additional return video system in addition to return video 1, press the button to display the return video signal selected with the switch on the viewfinder screen.
The reception level controls are common to intercom 1 and intercom 2. The talk lines can be set independently for intercom 1 and intercom 2.
Adjust the intercom audio listening level at the TRACKER connector page 14 on the connector panel when using the connector for intercom. Select the talk line for intercom 1. PROD: To talk over the producer line. Select the talk line for intercom 2. REAR: The intercom audio listening level is adjusted with the controls on this panel. The return video signal selected with the switch is displayed on the viewfinder screen while the button is pressed.
When other return video systems are used in addition to return video 1, you can monitor the signal selected with the switch on the viewfinder screen while pressing the button. Used for input and output of intercom audio signals if an XLR 5-pin headset is connected. When the camera is connected to a camera control unit, do not connect any remote control device, such as RCP and MSU, to this connector. The connector accepts analog HD signals only. SDI signals cannot be input.
Supply a signal of i P cannot be input. This is displayed in the viewfinder regardless of which RET is selected. When a camera control unit having two prompter inputs is connected, the signal of input 1 is output from this connector. Connect audio signals. An input select switch and microphone power switch are provided for each channel. OFF: Not to supply power. No function has been assigned to the lowermost position. No power is supplied to the microphone.
Adjustment of the flange focal length the distance between the lens mount attachment plane and the imaging plane is necessary in the following situations:. The flange focal length can be more precisely adjusted by using the focus assist indicators.
The various parts of the lens used in adjusting the flange focal length are in different positions on different lenses. Refer to the operation manual for the particular lens.
Take care not to move the distance ring. When the viewfinder is attached, do not leave the camera with the eyepiece facing the sun. Direct sunlight can enter through the eyepiece, be focused in the viewfinder and cause fire. For details about the viewfinder, refer to the operation manual of the viewfinder. The viewfinder position may be adjusted towards the front and rear and to the left and right to make it easy to see into it.
Loosen the viewfinder left-right positioning ring, pull the viewfinder stopper, then pull out the viewfinder by sliding it in the direction opposite to that when attached. To keep the viewfinder from bumping your leg when carrying the camera, install the BKW Viewfinder Rotation Bracket optional and rotate the viewfinder upwards. Lock the viewfinder in a slightly forward position before rotating it upwards. If the viewfinder is in its rearmost position, the arm of the viewfinder rotation bracket will strike the camera handle.
This adjustment helps you get the best balance for shooting with the camera on your shoulder. If an inappropriate hole is selected, the camera may fall over and may cause injury or damage. For this no need registration. Please take a look at the below related repair forum topics. May be help you to repair. If you are not familiar with electronics, do not attempt to repair! You could suffer a fatal electrical shock!
Instead, contact your nearest service center! Translate this page:. Boiler Manuals. Cable Box Manuals. Calculator Manuals. Caller ID Box Manuals. Camcorder Manuals. Camcorder Accessories Manuals. Camera Accessories Manuals. Camera Flash Manuals. Camera Lens Manuals. Can Opener Manuals. Car Amplifier Manuals. Car Satellite Radio System Manuals. Car Speaker Manuals.
Car Stereo System Manuals. Car Video System Manuals. Card Game Manuals. Carrying Case Manuals. Cash Register Manuals.
0コメント